Channel Mode Message; System Real Time Message - Kawai MP9500 Owner's Manual

RPN number implemted in MP9000 are the followings
RPN # Data
MSB LSB MSB
00H 00H mmH
OOH 01H mmH
OOH 02H mmH
7fH 7fH --
Program Change
Status 2nd Byte
CnH ppH
n=MIDI channel number
pp=Program number
Pitch Bend Change
Status 2nd Byte
EnH IIH
n=MIDI channel number
mm, li=Pitch bend value
1.2 Channel Mode Message
All Sound OFF
Status 2nd Byte
BnH 78H
n=MIDI channel number
All Note Off
Status 2nd Byte
BnH 7bH
n=MIDI channel number
1.3 System Real time Message
Active sensing
Status
FEH
Function & Range
Pitch bend sensitivity
mm:00H - 07H(0 - 7 half tone)
Il:lgnored(as OOH)
Master fine tuning
Default = 02H
mm,if:00 OOH - 40 OOH - 7f 7f (-8192x 100/8192 - 0 +8192x100/8192 cent)
Master coarse tuning
mm:28H - 40H - 58H(-24 - 0 - +24 half tone)
Il:lgnored(as 00H)
RPN NULL
:0H-fH(ch.1 - ch.16)
:00H - 7fH(Prog#1 - prog#128)
:10H - 7fH(prog#1)
0 - 3fH Single
40H - 7fH Multi
3rd Byte
mmH
:0H-fH(ch.1 - ch.16)
:00 00 - 7f 7fH(-8192 - O - +8192)
3rd Byte
00H
:0H-fH(ch.1 - ch.16)
3rd Byte
00H
:0H-fH(ch.1 - ch.16)
53
Default = 00H
Default = 40 00H(center)