3. MULTI mode
The following groups of parameters are stored in a MULTI.
TRANSPOSE (see p.16)
CONTROL KNOBS (see p.19)
EFX/REVERB (see p.16)
EDIT Int/Ext (see p.25)
1) MULTI Recall
OPERATION
STEP 1
To enter the MULTI mode. press the MULTI button and the MULTI
SINGLE
button will light up.
When entering the MULTI mode, the MP9500 returns to the most recently
used MULTI.
MULTI
Pri
PHO+STR
STEP 2
Choose a MULTI using the PATCH buttons.
First press any PATCH
button in the upper row to select a MULTI bank, then press any PATCH
button in the lower row to select a MULTI patch from that bank.
For example, to recall 6-4 MULTI, press the PATCH buttons "6" in the
top row, and "4" in the bottom row.
23