Channel Mode Message - Kawai MP8II Owner's Manual

Ofrecido por www.electromanuales.com
01H 64H mmH
01H 66H mmH
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the DCF.
RPN MSB/LSB
Status 2nd Byte
BnH 65H
BnH 64H
n=MIDI channel number
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP8II are the followings
RPN # Data
MSB LSB MSB
00H 00H mmH llH
mm:00H-0cH (0~12 [half tone]),ll:00H
00H 01H mmH llH
mm,ll :20 00H - 40 00H - 60 00H (-8192x50/8192 ~ 0 ~ +8192x50/8192 [cent])
00H 02H mmH llH
mm:28H - 40H - 58H(-24 ~ 0 ~ +24 [half tone]), ll:Ignored(as 00H)
7fH 7fH -- --
Program Change
Status 2nd Byte
CnH ppH
n=MIDI channel number
pp=Program number
Pitch Bend Change
Status 2nd Byte
EnH llH
n=MIDI channel number
mm,ll=Pitch bend value

1.2 Channel Mode Message

All Sound OFF
Status 2nd Byte
BnH 78H
n=MIDI channel number
Reset All Controller
Status 2nd Byte
BnH 79H
n=MIDI channel number
All Note Off
Status 2nd Byte
BnH 7bH
n=MIDI channel number
Decay time mm:00H - 7FH(-64 ~ 0 ~ +63)
Release time mm:00H - 7FH(-64 ~ 0 ~ +63)
3rd Byte
mmH
llH
:0H-fH(ch.1 ~ ch.16)
LSB Function & Range
Pitch bend sensitivity
Master fine tuning
Master coarse tuning
RPN NULL
:0H-fH(ch.1 ~ ch.16)
:00H - 7fH(0 ~- 127)
3rd Byte
mmH
:0H-fH(ch.1 ~ ch.16)
:00 00-7f 7fH(-8192~0~+8192)
3rd Byte
00H
:0H-fH(ch.1 ~ ch.16)
3rd Byte
00H
:0H-fH(ch.1 ~ ch.16)
3rd Byte
00H
:0H-fH(ch.1 ~ ch.16)
65
Default = 40H
Default = 40H
Default=02H
Default = 00H
Default = 40 00H