Store Link - Kawai MP9500 Owner's Manual

2) Store Link
OPERATION
STEP 3
The settings in the LINK function won't be stored after the power is
turned off, so to save the current settings, they must be stored using
the Store LINK function.
Make sure that the LINK function is on.
Press the STORE button.
The display will ask for confirmation.
To cancel Store Link at this point, press the VALUE-DOWN button.
Otherwise, go on to the STEP 3.
To execute Store Link, press the VALUE-UP button again.
The current LINK settings are now stored. The display will change to
read "Completed!!".
Note:
In the Store LINK, the VALUE-UP button represents "YES", the VALUE-
DOWN button represents "NO".
41