Dump All - Kawai MP9500 Owner's Manual

3) Block Dump
OPERATION
STEP 3
This function transmits the MULTI settings of the MP9500 as System
Exclusive Messages via the MIDI OUT in two bulk messages. The
Block vp 1 transmits the first 32 MULTI settings (1-1 ~ 4-8) and the
Block By 2 transmits the last 32 MULTI settings (5-1 ~ 8-8).
Press the STORE button.
And then press the MENU-UP button until "Block Dump" appears on
the display.
Press the VALUE-UP button.
Block Dump 1
Sure?
The display will ask for confirmation.
To cancel Dump All at this point, press the VALUE-DOWN button.
Otherwise, go on to the STEP 3.
Press the VALUE-UP button again.
When the data is done transmitting, the display will change to read
"Completed!" Dump All is complete.
Note:
In the Block Dump, the VALUE-UP button represents "YES", the VALUE-
DOWN button represents "NO".
36