Channel Mode Message - Kawai MP4 Owner's Manual

01H 64H mmH
01H 66H mmH
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the dcf.
RPN MSB/LSB
Status
BnH
BnH
n=MIDI channel number
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP4 are the followings
RPN # Data
MSB LSB MSB
00H 00H mmH
00H 01H mmH
00H 00H mmH
00H 01H mmH
00H 02H mmH
7fH 7fH --
Program Change
Status
CnH
n=MIDI channel number
pp=Program number
Pitch Bend Change
Status
EnH
n=MIDI channel number
mm,ll=Pitch bend value

1.2 Channel Mode Message

All Sound OFF
Status
BnH
n=MIDI channel number
Decay time mm:00H - 7FH(-64 - 0 - +63)
Release time mm:00H - 7FH(-64 - 0 - +63)
2nd Byte 3rd Byte
65H mmH
64H llH
Function & Range
Pitch bend sensitivity
mm:00H-0cH(0-12 half tone)
ll:00H
Master fine tuning
mm,ll:20 00H - 40 00H - 60 00 (-8192x50/8192 - 0 +8192x50/8192 cent)
Pitch bend sensitivity
mm:00H - 07H(0 - 7 half tone)
ll:Ignored(as 00H)
Master fine tuning
mm,ll:00 00H - 40 00H - 7f 7f (-8192x100/8192 - 0 +8192x100/8192 cent)
Master coarse tuning
mm:28H - 40H - 58H(-24 - 0 - +24 half tone)
ll:Ignored(as 00H)
RPN NULL
2nd Byte
ppH
:0H-fH(ch.1 - ch.16)
:<Multi Timbre OFF>
00H - 3fH(Sound#1-64)
40H - 7fH(Setup#1-64)
:<MultiTimbre ON>
Normal Tone Bank 00H-3fH(Sound#1-64), 40H-7fH(Sound#1)
Drum Bank
2nd Byte 3rd Byte
llH mmH
:0H-fH(ch.1 - ch.16)
:00 00 - 7f 7fH(-8192 - 0 - +8192)
2nd Byte 3rd Byte
78H 00H
:0H-fH(ch.1 - ch.16)
51
Default = 40H
Default = 40H
:0H-fH(ch.1 - ch.16)
Default=02H
Default = 02H
Default = 00H
Default = 00H
00H-7fH(STANDRAD KIT)
Default = 40 00H(center)