Kawai MP9500 Owner's Manual page 52

Soft Pedal
Status
BnH
2nd Byte
43H
3rd Byte
vvH
n=MIDI channel number :0H-fH(ch.1 - ch.16)
vv = Control Value :00H - 7fH(0 - 127) Default = 00H
0 - 63 =OFF, 64 - 127=ON
Sound controllers #3-6
Status 2nd Byte 3rd Byte
BnH 48H vvH Release time
BnH 49H vvH Attack time
BnH 4aH vvH Cutoff
BnH 4bH vvH Decay time
n=MIDI channel number :0H-fH(ch.1 - ch.16)
vv = Control Value :00H - 7fH(0 - 127) Default = 40H
Common Effect
Status 2nd Byte 3rd Byte
BnH 5bH vvH Reverb depth
BnH 5cH ss Rotary speaker speed (0-63: Slow, 64-127: Fast)
Only when rotary speaker selected
BnH 5dH vvH Effect depth
:0H-fH(ch.1 - ch.16)
:00H - 7fH(0 - 127)
n=MIDI channel number
vv = Control Value
NRPN MSB/LSB
Status 2nd Byte 3rd Byte
BnH 63H mmH
BnH 62H IIH
n=MIDI channel number :0H-fH(ch.1 - ch.16)
mm=MSB of the NRPN parameter number
{I=LSB of the NRPN parameter number
NRPN numbers implemented in MP9500 are as follows
NRPN # Data
MSB LSB MSB Function & Range
01H 20H mmH Cutoff offset
mm:0eH - 40H - 72H(-50 - 0 +50)
01H 63H mmH Attack time offset
mm:0eH - 40H - 72H(-50 - 0 +50)
01H 64H mmH Decay time offset
mm:0eH - 40H - 72H(-50 - 0 +50)
01H 66H mmH Release time offset
mm:0eH - 40H - 72H(-50 - 0 +50)
* ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the def.
RPN MSB/LSB
Status 2nd Byte
BnH 65H
BnH 64H
n=MIDI channel number
3rd Byte
mmH
HH
:0H-fH(ch.1 - ch.16)
mm=MSB of the RPN parameter number
II=LSB of the RPN parameter number
52