Table Of Contents - Kawai MP9500 Owner's Manual

TABLE OF CONTENTS
WELCOME TO THE MP9500.....6
1. NAMES AND FUNCTIONS.....8
2. SINGLE mode.....12
1) Getting Ready.....12
2) Playing the MP9500 as a stand anole Digital Piano.....12
3) Using the MP9500 as a MIDI controller.....13
4) SINGLE Edit.....14
Voicing.....15
Tx/Rx Ch (Transmit/Receive Channel).....15
FootSW (Foot Switch).....15
ExpPdl (Expression Pedal).....15
5) TRANSPOSE.....16
6) EFX/REVERB.....16
EFX.....16
EFX ON/OFF.....16
EFX type.....17
REVERB.....18
REVERB ON/OFF.....18
REV type.....18
Adjusting the EF X/REVERB value using the CONTROL KNOBS.....
7) EQ (EQUALIZER).....20
8) TONE MODIFY.....21
9) Transmitting MIDI Control Changes using the CONTROL KNOBS.
3. MULTI mode.....23
1) MULTI Recall.....23
2) MULTI Edit.....24
How to change the MULTI Edit parameters.....24
Edit Common.....25
Zone Mode (Edit).....25
Sound <Int Only>.....25
TX Prg # <Ext only>.....25
Prg # <Ext only>.....25
TX Bank <Ext only>....,25
Bank MSB/LSB <Ext only>.....26
TX Ch <Ext only>.....26
K.Range Hi/Lo <Int/Ext>.....26
Vel SW (Velocity Switch) <Int/Ext>.....27
Vel SW Val (Velocity Switch Value) <Int/Ext>.....28
Vel Sense (Velocity Sense) <Int/Ext>.....28
Transpose <Int/Ext>.....28
TX Volume (Transmitting Volume) <Ext only>.....29
Volume <Int/Ext>.....29
Damper <In/Ext>.....29
FootSW <Int/Ext>.....29
ExpPedal <Int/Ext>.....29
Modulation <Int/Ext>...29
Bender <Int/Ext>.....29
TXBendrRng (Transmitting Bender Range) <Ext only>.....29
Bender Range <Int/Ext>.....30
TX Pan (Transmitting Pan) <Ext only>...30
Pan <Int/Ext>.....30
TX Fine Tune (Transmitting Fine Tune) <Ext only>.....30
Fine Tune <Int/Ext>.....30
TX Knob [A-D] <Ext only>.....30
Knob [A-D] CC# (Knob A-D/Control Change No.) <Ext only>
TX Cutoff (Transmitting Cutoff) <Ext only>.....31
TX Attack (Transmitting Attack) <Ext oniy>.....31
TX Decay (Transmitting Decay) <Ext only>.....31
TX Release (Transmitting Release) <Ext only>.....31
Voicing <Int only>.....31
Solo <Ext only>...32
Solo Mode <Ext only>.....32
4. STORE.....33
1) Store SINGLE.....33
2) Store MULTI.....34
3) Dump All.....36
4) Dump Current.....37
5) Reset Current.....38
6) Reset All.....39
5. LINK.....40
1) LINK setting.....40
2) Store LINK.....41
6. SYSTEM mode.....42
1) System Menu.....42
How to change the SYSTEM Edit parameters.....42
System Ch (System Channel).....43
Touch .....43
Temperament.....44
Key of Temperament.....44
Tuning C ~ B.....45
SysTune (System Tuning).....45
FootSW CC# (Footswitch Control Change).....45
ExpPdl CC# (Expression Pedal Control Change).....45
Local Control.....45
RX Ch [1-16] (Receive Channel).....46
LCD Contrast.....46
7.OTHERS.....47
MIDI IN.....47
MULTI Program Number Tabile.....47
SINGLE Program Number List.....48
Specifications.....49
MP9500 MIDI Implementation. ....50