Off
Loud
Soft
Sa
Vel SW Val
Volume
Volume
|
Volume
So
Level
Level
|
Level
i
<>
<>
<—
Non-sound range | Sound range
Sound range
Non-sound range
0o
e
2
0
e»
27
o
e
>z
softer
Strength of the
harder
softer
Strength ofthe
harder
softer
Strengthofthe
harder
struck key
struck key
struck key
Vel SW Val (Velocity Switch Value) <Int/Ext>
[Value Range: 0 ~ 127]
This parameter determines switching level of the key velocity.
For the Loud Vel SW : determines the lowest key velocity to sound.
For the Soft Vel SW
: determines the highest key velocity to sound.
Note:
Each zone can have a separate Velocity Switch Value.
By setting the
Soft Zone Velocity Switch Value higher than that of the Loud Zone, a
dynamic area where both sounds play can be created.
Itis also possible
to switch Internal Zones with External Zones for even more possibilities.
Vel Sense (Velocity Sense) <Int/Ext>
{Value Range: -64 ~ 0 ~ +63]
This parameter adjusts the keyboard response.
If a positive value is set, the velocity level increases when keys are
struck harder.
On the contrary, if a negative value is set, the velocity level decreases
when keys are struck harder.
-63
0
+63
Vertical Line: Volume level
Horizontal Axis: Strength of the struck key
Transpose <Int/Ext>
[Value Range: -36 ~ 0 ~ +36]
This parameter sets the amount of transposition.
The available range
is three octaves above or below middle C (C3).
This parameter can be set for each zone separately in the MULTI Edit
menu.
(To set the master transpose, press the TRANSPOSE button and set the
value.)
28