Kawai MP9500 Owner's Manual page 19

OPERATION
STEP 1
Make sure that the EFFECT button in the CONTROL KNOBS section is
lit. If the EFFECT button is turned off, press it to turn it ON.
NINNI] EFFECT | EFXRATE EFXDEPTH REVTIME = REVDEPTH
= to MID LO MID HI HI
I Modi ro pon DEE RAR
CENE NOTE
STEP 2
The CONTROL KNOBS are now active and assigned to the EFX/REVERB
parameters. Use the CONTROL KNOBS to change the current settings.
EfR (EFX Rate) adjusts the value of the preset parameter for each EFX.
EfD (EFX Depth) adjusts the depth of the EFX added to the sound.
RvT (REVERB Time) adjusts the reverb time.
RvD (REVERB Depth) adjusts the depth of the reverb added to the sound.
EFX parameter list
EFX Rate EFX Depth
1. CHORUS 1 rate 0 -12.7Hz send level
2. CHORUS 2 rate 0 -12.7Hz send level
3. CHORUS3 rate 0 -12.7Hz send level
4. FLANGER 1 rate 0 -12.7Hz send level
5. FLANGER 2 rate 0 -12.7Hz send level
6. ENSEMBLE rate 0 -12.7Hz send level
7. CELESTE rate 0 -12.7Hz send level
8. DELAY 1 delay time 0 -100 (%) send level
9. DELAY 2 delay time 0 -100 (%) send level
10. AUTO PAN rate 0 -12.7Hz wet balance
11. TREMOLO rate 0-12.7Hz wet balance
12. PHASER 1 rate 0-12.7Hz wet balance
13. PHASER 2 rate 0-12.7Hz wet balance
14. ROTARY 1 rate slow/fast wet balance
15. ROTARY 2 rate slow/fast wet balance
16. AUTO WAH sense 0 -100 (%) wet balance
17. EXCITER intensity 0 -100 (%) send level
18. ENHANCER intensity 0 -100 (%) send level
19. OVERDRIVE drive 0 -100 (%) wet balance
20. DISTORTION drive 0 -100 (%) wet balance
21. SYMPRES _ early ref level 0 -100 (%) send level
19