Dump Current - Kawai MP9500 Owner's Manual

4) Dump Current
OPERATION
STEP 1
This function transmits the current and active settings of the MP9500 as
a System Exclusive Message via the MIDI OUT.
(In the SINGLE mode, only SINGLE mode data is sent. In the MULTI
mode, the current values for all MULTI parameters are transmitted.)
Press the STORE button.
And then press the MENU-UP button until "Dump Current" appears on
the display.
STEP 3
The display will ask for confirmation.
To cancel Dump Current at this point, press the VALUE-DOWN button.
Otherwise, go on to the STEP 3.
Press the VALUE-UP button again.
The display will change to read "Completed!!" Dump Current is
complete.
Note:
In the Dump Current, the VALUE-UP button represents "YES", the VALUE-
DOWN button represents "NO".
37