Vel Sw (Velocity Switch) <Int/Ext - Kawai MP9500 Owner's Manual

Note:
For convenience, the keyboard is used to set the values for K.Range Hi
and K.Range Lo. Be careful not to leave the K.Range Hi or K.Range Lo
parameters active in the display after these values have been set!
Note:
The K.Range Hi and K.Range Lo can be also set using the VALUE
buttons.
TIPS
An effective use of the K.Range Hi and Lo
SERE PEN
pumn =e
ft Ay a
È ESSE c= abe
____Playable Key Range ______1
(1) Assign a patch to the Zone 1 and a different patch to the Zone 2
using the regular method.
(2) For the Zone 1, set K.Range Lo to "F0" and K.Range Hi to "E5".
(3) For the Zone 2, set K.Range Lo to "A1" and K.Range Hi to "G6".
F0 - G1 : These keys will play the Zone 1 only.
A1 - ES : These keys will play the Zone 1 and 2 as a layer.
F5 - G6 : These keys will play the Zone 2 only.
Vel SW (Velocity Switch) <Int/Ext>
[Value Range: Off/Loud/Soft]
This parameter sets the velocity switch type.
Off :No effect. The PATCH plays normally.
27