Store Link - Kawai MP9000 Owner's Manual

2) Store Link
STEP 1
STORE
A
0
VALUE
STEP 3
To save the LINK settings, use the STORE button.
The settings in the LINK function won't be stored after the power is turned
off. so to save the current settings, they must be stored using the Store
LINK function.
Make sure that the LINK function is on.
Press the STORE button.
The display will change.
Store Link
Press VALUE UP
Press the VALUE-UP button.
The display will change.
Store Link
Sure?
The display will ask if the Store Link function should be executed or not.
To cancel Store Link at this point, press the VALUE-DOWN button.
Otherwise, go on to the STEP 3.
To execute Store Link, press the VALUE-UP button again.
The current LINK settings are now stored. The display will change.
Store Link
Completed! !
Note:
In the Store LINK, the VALUE-UP button represents "YES," the VALUE-DOWN
button represents "NO."
51