Download Print this page
Vivo STAND-V100C Instruction Manual
Vivo STAND-V100C Instruction Manual

Vivo STAND-V100C Instruction Manual

Single ultrawide monitor desk mount

Advertisement

Quick Links

Single Ultrawide Monitor Desk Mount
Instruction Manual
SKU: STAND-V100C
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v100C
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

loading
Need help?

Need help?

Do you have a question about the STAND-V100C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vivo STAND-V100C

  • Page 1 Single Ultrawide Monitor Desk Mount Instruction Manual SKU: STAND-V100C Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v100C GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
  • Page 2: Package Contents

    WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury.
  • Page 3 STEP 2 (Option A) Clamp Installation Install Pole (D) to Clamp (C) using M6x16mm Screws (S-A) and 4mm Allen Wrench (T-A). Remove protective film from Pads (H) and apply them to Clamp (C) as shown. Secure clamp assembly to desktop by tightening hand bolt. STEP 2 (Option B) Grommet Installation Remove Screw (C1) from Clamp Bolt (C2) and remove Clamp Bolt (C2) from Clamp (C).
  • Page 4 STEP 2 (Option B Continued) Remove protective film from Pads (H) and apply them to the bottom side of Grommet Plate (G). Align the pin on top of Grommet Plate (G) with the small hole on the bottom of Pole (D) and position the parts over the grommet hole.
  • Page 5 STEP 4 Mount VESA Plate (A) to monitor using appropriate Screws (M-A thru M-D), M5 Washers (M-E), and Spacers (M-F).
  • Page 6 STEP 5 Slide monitor with VESA Plate onto VESA Bracket (B) and secure using M6x10mm Thumbscrew (S-B). STEP 6 Use Cable Clip (F) to route cables. Store Allen Wrenches (T-A, T-B) in slots of Clip.
  • Page 7 WARNING Keep the displays positioned over the desktop within the arrow range shown. ADJUST AS DESIRED Use 6mm Allen Wrench (T-B) to loosen or tighten Monitor Bracket (B) tension.
  • Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...