If Necessary: Reset Button; Led Indicator - Zcom AS220V2 User Manual

AS220V2
Port
LAN Port
2.4.

If necessary: reset button

If the access point needs to be reset, please press and
hold the reset button for more than ten seconds to
restore to factory default settings
2.5.

LED Indicator

The following table describes the AP status referring to different LED behavior.
Color Behavior
Steady
Red
Flashing
Blue Flashing
Steady
Green
Flashing
2x2 Dual Band 802.11ac Wave 2 Indoor Access Point
Description
The LAN port operates at 10/100/1000 Mbps at supports an RJ45
connector.
Supporting PoE Out, the LAN port can supply PoE power to PDs
(Powered Devices) plugged into the LAN port. Up to 10 Watts output
power can be supplied.
Description
Initializing
Factory defaults, waiting to be integrated
Device is busy updating its firmware; do not touch or unplug it
Internet connection detected
No internet connection detected
User Manual
Page 5