Brief Introduction - Foxtech SYK-30 User Manual

In any cases （ not matter power on or not ） avoid aiming the camera at
extremely high-temperature radiation source (e.g. the sun), or else the sensor is
likely to be damaged.
Be sure not to adjust the pod or change its mechanical structure, installing the
pod on the aircraft before power on.
Please do not add other peripherals (filters, hoods, etc.) to the camera, please
use the original camera to avoid pod performance degradation or load imbalance
which may cause the damage to pod.
Ensure that your aircraft flight control system master works in the safest state
when powered. We strongly recommend that you remove the propeller from the
aircraft while setting the pod parameters, use a non-powered battery to power the
pod, and keep the child away from the preset flight area.
In view of our company can't control the specific use of the user, installation,
assembly, modification (including the use of non-designated spare parts) and
improper use of the above caused by direct or indirect damage, Our company will
not bear the corresponding loss and free of liability.
This manual subjects to any change without notice.

Brief Introduction

3