Using Your Phone; Change The Volume - Uniden XDECT SSE47 Series Owner's Manual

To...
make a
call, dial the
number, then
answer a call
hang up
ignore the
call (mute the
ringer)
switch to/from
the speaker
mute the
microphone
put a call on
hold
return to a call
on hold
• After 2 min 50 sec on hold, the call will be disconnected.

Change the Volume

You can adjust each station's volume independently. Press UP or DOWN to increase or
decrease the earpiece or speaker volume when you are on a call. You can adjust the
ringer volume only when the phone is in standby. Turning the ringer volume all the way
down turns off the ringer.
# If you want to change the volume of Caller ID announcements, change the ringer
volume.

USING YOUR PHONE

From the base
Corded
Handset
Pick up the
handset.
Pick up the
handset.
Place the
handset in the
cradle.
Press CLEAR/MUTE
while the phone is ringing.
Press SPEAKER.
Press CLEAR/MUTE.
Press again to turn the microphone back on.
Press INTERCOM/HOLD. *
Quickly press
and release the
hook switch.
Speaker
Press
SPEAKER.
Press
SPEAKER.
Press
SPEAKER.
Pick up the
handset.
Press
SPEAKER.
From a cordless handset
Earpiece
Press
TALK/FLASH.
Press
TALK/FLASH.
Press END/CLEAR or place the
handset in the cradle.
Press MUTE/DELETE while the
phone is ringing.
Press SPEAKER.
Press MUTE/DELETE.
Press MENU/OK and select
Transfer.*
Press
TALK/FLASH.
Speaker
Press SPEAKER.
Press SPEAKER.
Hold/
Press
SPEAKER.
19