Rewind & Play Operation; Dash & Play Operation; Single-Tune Repeated Playback Operation - Kenwood MIDI M-97 Instruction Manual

Compact audio system
Table of Contents

Advertisement

DPSS operation
@ Rewind & Play operation
This operation is not available from the remote con-
trol unit.
Direction of tape direction indicator: >
Press simultaneously.
Direction of tape direction indicator: <@
Press simultaneously.
@ Single-tune repeated playback
operation
1 Play the tune to be repeated.
2? Press the play key of the same direction as
the current tape transport direction.
When direction of tape direction indicator is »
@ Normal playback resumes after repeating the same tune for
16 times.
To cancel the playback above in the middle
@ Playback is stopped.
44 = w-97/97MiEn)
@ Dash & Play operation
The
Dash
& Play skips long
non-recorded
spaces
automatically as the tape is played.
This
operation
is not
available
from
the
remote
control unit.
1 Determine the playback mode (conditions).
DIRECTION
The indication changes every time the key is pressed.
... Two sides are repeated 8 times, after which
playback stops.
... Two sides are repeated only once, after which
playback stops.
.. One side is repeated 8 times, after which play-
back stops.
@ In case the [DIRECTION | key is set to" => * and tapes are
inserted in both of the decks, when a deck finishes Dash &
Play, the other deck starts Dash & Play for 16 times, after
which it stops.
2 Press the) andi==] keys simultaneously.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Midi m-97m

Table of Contents