Table of Contents
Advertisement
Timer operations
Be sure to adjust the present time before proceeding to
the following.
@ To check timer program contents
PROGRAM
1 Press the [PROGRAM] key.
2 Press the numeric key corresponding to the
program to be checked.
WSUN
2MON
aTUE
@wED
THU
SFR
7/SAT.
@ If no program is selected while the program No. indicators
are blinking, the previous display condition resumes.
@ When a program is selected, its contents will be displayed
for about 3 seconds, and the previous display resumes af-
ter it.
@ To cancel timer program execution
1 Press the
key.
Press the numeric key corresponding to the
program the execution of which is to be
cleared.
Select the number with a numeric key.
SUN
2/VMON
SUE
4WED
STHU
FAI
WISAT
@ The program contents are not cleared even when its execu-
tion is canceled.
Re-activation of timer execution after canceling
it
Since the program itself is retained in memory, check its con-
tents and perform the operation from the step "Activate the
execution of the program' as follows.
®@ Press| EXE. | key.
@ Select the program
No. to be executed by pressing the
numeric key under which it is set.
® Adjust the volume and tone in case of timer reception of
broadcast or timer playback of CD or tape.
® Switch the power OFF.
74 = M-97/97M(En)
@ Operation of one-touch timer
The
one-touch
timer
allows
to switch
power
ON
after a specified time period, set in the unit of 30
minutes, from the moment it is activated.
1 Set the timer ON time.
Press the
key.
0.17.T. lights up.
The ON time of timer is displayed.
The displayed time is incremented
by 30 minutes every time the key
is pressed.
@ When the key is pressed once, a time that can be divided
by 30 minutes and within 30 minutes from the present time
is displayed as the ON time. (Example: When
pressed at
7:40, "8:00" will be displayed.)
@ The ON time is incremented in 30-minute steps, for exam-
ple from 0:00 to 0:30, 1:00, 1:30, and so on.
@ The ON time can be set up to 12 hours later.
@ The one-touch timer can be set even when the power is
OFF.
2 Switch the power OFF.
Press the
key
of the amplifier.
@ The ON time can be checked by pressing the [O.T.T. |key
once.
@ When the power is switched ON, the sleep timer will auto-
matically be set to 60 minutes.
@ When the power is switched ON, the last station received
by the tuner will be received.
To cancel one-touch timer activated
Switch the power ON
Press the
key until
the O.T.T. indicator goes off.
=f
tr
Notes:
1. If time adjustment is performed after the ON time has been
set, the ON time setting is canceled. In this case, execute
setting once again.
2. The one-touch timer is released when the | ADJUST]
key is
pressed.
Advertisement
Table of Contents
