Table of Contents
Advertisement
Recording of CD playback (CCRS) (M-97)
@ AI EDIT recording
When the total playing time of a CD exceeds the recording time of tape, this. function allows to accommodate all
tracks in a tape by cutting the end of each track by means of fade out. It is also possible to specify the important
tracks that must not be cut.
1 Set up Deck B ready for recording.
@ Insert the cassette tape.
Tape to be recorded
@ Set the tape
transport direction.
@ Select the tape side(s) to
be recorded.
DIRECTION
) : Select two-side recording.
@ Select the Dolby NR
mode.
DOLBY
NA
2 Select the CD/LD input.
3 Insert the disc in the CD player.
Select the tracks which must not be cut in
recording.
@® Press the
key of the CD player.
e
lights up.
@ Input the track Nos. using the numeric keys.
@ Input several numbers in a desired order.
Notes:
5 Select the Al EDIT mode with the|EDIT MODE
key of the CD player.
exam
[
[7 EDIT —»| Al EDIT
|—-»MULT]! ae
The mode changes every time the key is pressed.
@ Proceed
to the
next step within
8 seconds
after setting
Al EDIT]
. If 8 seconds have elapsed, press the | EDIT MODE
key again.
6 Input the two-way recording time of the tape.
Use the numeric keys of the CD player.
C-60 tape: Press
6 times, and| 0 lonce.
C-46 tape: Press
4 times, and| 6 jonce.
@ 46, 54, 60 or 90 can also be selected ee time tne Tive
key is pressed.
In this case, press the| EDIT MODE] key
again to establish the input.
@ Tracks are edited automatically to fit sides A and B, and the
end of editing is indicated when the
indicator
changes from blinking to continuous lighting.
7 Select
with the
key
of the cassette deck.
8 Press the
key.
Normal-speed recording
NOR
_CCRS HIGH
Double-speed recording
Nor
CCRS_HIGH
e
or
is displayed in the display.
Recording occurs as shown below.
- Programmed tracks 4
—_>
@ First,
the
programmed
tracks
are
recorded
without
any
cutting, the other tracks are recorded with the end of every
track cut by fade-out.
@ If the tape has enough recording time, all tracks are recorded
until the end.
@ The CD piayer and cassette deck enter the stop mode auto-
matically after the completion of recording.
1. lfan extremely-short tape recording time is set, automatic editing may not occur, or the tracks that must not be cut may cut.
2. The | SPACE]
key and | REPEAT}
key functions are inoperative.
3. Edit operation does not occur if a track No. 44 or more has been programmed.
64 = -97/97M(En)
Advertisement
Table of Contents
