Playing A Cd/ Audio Fi Le; Programming Tracks/Fi Les; Random Play - Kenwood CLX-70 Instruction Manual

Using the CD/USB device/SD card
Playing a CD/ audio fi le
Press 6 button to start playback.
The track/fi le number and elapsed playing time of
the current track/fi le appear on the display.
Basic operations
Operation type Operation
Press STOP 7 button.
To stop playback
Press 6 button.
To interrupt
playback Press again to resume playback.
Press and hold 4 or ¢ button for
To search for a
particular passage more than 2 seconds.
Press the 6 button when the desired
during playback
passage is located.
To select a track/ file Press 4 or ¢ button in play or pause
mode.
Press FOLDER/P.CALL A or B button
To select a folder
(For audio file only) in play or pause mode.
⁄
• For audio file; "DIR:xxx TRK:xxx" appears on the display.
"DIR:xxx" indicates album number and "TRK:xxx" indicates the
file number.
• The digit buttons, 0–9 on the remote control unit can also be
used to select a track/file.
Press the digit buttons as shown below:
CD
To select track/file 2 2 and ENTER
To select track/file 23 2 and 3
To select file 120 —
If the ENTER button is not pressed, the search for the selected
track/file will start in 5 seconds.
Programming tracks/fi les
Programming tracks/fi les of a CD/audio fi le is possible
when playback is stopped. Up to 30 tracks can be
stored in the memory in any order.
1
In stop mode, press P.MODE button to enter
program setting.
The icon "PGM" and "P–01 T– –"/ "P–01 T– – –"
appears on the display.
"T– –" indicates track number of the CD.
"T– – –" indicates fi le number of the audio fi le.
"P–01" indicates program number.
The icon "PGM" starts fl ashing.
2
Press MULTI CONTROL A or B button, or digit
buttons 0–9 to select the desired track/fi le.
3
Press ENTER button to store the selected track/
fi le.
The track/fi le number returns to "T– –"/ "T– – –" and
the next program number appears on the display.
14
CLX-70
4
5
⁄
• "PGM FULL" appears on the display, if you attempt to program
more than 30 tracks/files.
• Audio files can only be programmed within the same source.
• Now enter the new track/file number with either method
below.
– Press the MULTI CONTROL A or B button to select the
– Press the CLEAR button to clear the track/file number
• If you press REPEAT button during programmed playback,
the current track or all programmed tracks/files is/are played
repeatedly.
The icon "REP. " or "REP. ALL" and the icon "PGM" appear on the
display.
To clear the program
Press P.MODE button.
Audio file
⁄
2 and ENTER
2, 3 and ENTER
• "P" represents PROGRAM.
1, 2 and 0
• The function of program setting cannot be used in PLAY/
PAUSE mode.

Random play

You can play all the tracks/fi les in random order.
1
2
Repeat steps 2 to 3 to select and store other
desired tracks/fi les in this way.
The icon "PGM" appears on the display.
Press 6 button to play the programmed
tracks/fi les.
desired track/file.
programmed. Select the new track/file number using digit
buttons "0" to "9" on the remote control unit.
The icon "PGM" disappears from the display.
During playing, pause or stop mode, press
RANDOM button to enable random play mode.
The icon "RDM" appears on the display.
To exit random mode, press RANDOM button
again.
The icon "RDM" disappears from the display.