Table of Contents
Advertisement
M-97M(DP-M87)
DOLBY NR key
MODE key
@ ERASE recording
CCRS keys DIRECTION key
When a track should end in the middie at the location where the tape is reversed, this function allows to erase
automatically the recording of that track and start the recording of the other side with that beginning of the track.
:
T
d by track No.
:
1 Set up Deck B ready for recording.
Pree
ete
wer rane
DISC NO.
@® Set the tape
transport direction.
Remote control unit
© Select the tape side(s) to
be recorded.
DIRECTION
indicator goes off.
5
Select the ERASE recording mode.
MODE
7D
_: Two-side recording
=
=: One-side recording
@ Select the Dolby NR mode.
bOLaY NR
ERASE
2
Select
the
CD/LD
input
The mode changes every time the key is pressed.
3
Insert the disc in the CD player.
6
Press the |CCRS| key.
@
Close the door.
Normal-speed recording.
Double-speed recording.
NOR
CCRS
HIGH
4
Select the disc and track to be recorded.
7
—
=
To record by programmed sequence:
@ Enter the
mode.
@ Program desired tracks
in desired order.
P.MOOE
.
.
.
.
@> Réterte page 33.
@ [HIGH] or
is displayed in the display.
Recording occurs as shown below.
Ce
meme
= Erasure of C
Remote control unit
DISC NO.
Co
[PGMlindicator lights up. GQ
ey
|
Stop after erasure of F
;
*
8
Recording of C from the beginning
Notes:
1.
2.
3.
When the
key is pressed during CD play, the playback is interrupted and CCRS setting operation starts.
The CCRS searches the peak level on a CD in a limited period of about 60 seconds.
Therefore, it could happen that the optimum level can-
not be adjusted, through it is a very rare case.
lf the length of a track on the CD is extremely long such as with a classical music, the CCRS cannot be used because the music cannot be
fit in one side of tape. In such a case, the CD should be recorded referring to "Synchro recording of CD playback".
. When the transport direction indicator of the cassette deck is" =~
*, the tape end processing occurs only on side A of tape.
. When the tune being recorded at the end of the tape is to be erased, the ending part of the previous tune may also be erased if the space
between the tunes is short.
M-97/97M(En)
3
Advertisement
Table of Contents
