Gas Connection; Electrical Connection - Atag FG9011EAN Manual

INSTALLATION

Gas connection

Electrical connection

• We recommend that the hob be connected by means of a fixed
pipe. Connection using a specially designed safety hose is also
permitted.
• The pipe behind the oven must be made entirely out of metal.
Warning!
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• The connection tap for the appliance must always be positioned
such that it is easily accessible.
• The type of gas and the country for which the appliance has been
designed are indicated on the appliance identification card.
Before using the appliance for the first time check the connections
using water and washing-up liquid to ensure that there are no gas
leaks.
230–240 V~ - 50/60Hz
• Wall socket and plug must be accessible at all times.
• Make sure that the cable does not come into contact with parts of
the oven that may become hot.
• If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in the
supply cable.
• Do not use a multiple socket or an extension lead to connect the
device to the electrical mains. Safe use of the device cannot be
guaranteed with such accessories.
EN 27