Maintenance; Please Note; General - Atag FG9011EAN Manual

MAINTENANCE

Please note

General

EN 18
Disconnect the appliance from the power supply before beginning
repairs. Preferably unplug the appliance, switch off the fuses, or set the
switch in the meter cupboard to zero. Turn off the gas tap on the supply
line.
Do not use steam cleaners or high-pressure steam cleaner to
clean the device.
Ffront of the unit
Clean the surface with a liquid, non-abrasive cleaner for smooth
surfaces and a soft cloth. Apply the cleaning agent to the cloth and
wipe away the dirt; then rinse with water. Do not apply the cleaning
agent directly onto the surface. Do not use harsh or abrasive cleaning
agents, sharp objects, or steel wool, as this can cause scratches on the
unit.
Aluminium surfaces
Aluminium surfaces should be cleaned with non-abrasive, liquid
cleaning agents designed for such materials. Apply the cleaning agent
to a damp cloth and wipe the surface clean; then rinse the surface with
water. Do not apply the cleaning agent directly onto the aluminium
surface. Do not use any abrasive cleaning materials or scourers. The
surface must not come into contact with oven sprays.
Stainless steel front panels
Clean the surface with a mild detergent (soapsuds) and a soft sponge
that doesn't scratch the surface. Do not use abrasive or solvent-based
cleaning agents. If you do not follow these instructions the casing may
become damaged.
Painted and plastic surfaces
Clean the knobs/buttons and door handle with a soft cloth and liquid
cleaning agent suitable for cleaning smooth, painted surfaces. You can
also use cleaning agents specifically designed for this type of surfaces.
In this case, follow the instructions of the manufacturer.