Running The Setup Wizard - US Robotics 3CP5613 User Manual

Running the Setup Wizard

The instructions for installing your Connections
software are on the installation map included in your modem's
box. If you have not completed this portion of your install, you
should do so now.
Using Connections Software
Once installation is complete, you can use the Connections CD
at any time by following these steps:
Insert the Connections CD into your CD-ROM drive.
If the CD is already in your drive, take it out and reinsert
it.
If you have disabled AutoPlay, click Start, point to
Programs, point to 3Com U.S. Robotics, and click
Connections.
Installing the RapidComm
NOTE:
If you have an older version of RapidComm
software on your system, uninstall it before continuing.
To start the uninstall, double-click the Add/Remove
Programs icon in the Control Panel. This will erase any
faxes you have in your inbox, and delete your phone/fax
lists. If you need to save them, copy them to a new
directory.
S
OFTWARE
™
CD-ROM
™
Software
I
NSTALLATION
The Connections CD contains the RapidComm communications
software. RapidComm is used with standard modems;
RapidComm Voice is used with modems with voice
functionality.
Once you have installed the Connections program group, you
can install the RapidComm software. (The Setup Wizard does
not install RapidComm.)
Follow these instructions to install RapidComm:
1. Start the Connections CD (follow the instructions in the
section "Using Connections Software" on this page).
2. On the main Connections menu, click Software.
3. Click the Communications button.
4. Click the RapidComm (if you have a regular faxmodem) or
RapidComm Voice (if you have a voice faxmodem)
button.
5. Follow the on-screen instructions to finish the installation.
NOTE:
The CD also contains an electronic user
manual for RapidComm and RapidComm Voice.
Congratulations—you are now ready to
start using your U.S. Robotics modem!
2-1