US Robotics 3CP5613 User Manual page 67

Extended Data Commands
&M3 Reserved
&M4 Normal/ARQ
&M5 ARQ mode
&Nn Sets connect speed. If connection cannot be made
at this speed, the modem will hang up.
Note: When used in conjunction with &Un and &Un is greater than 0,
&Nn sets the ceiling connect speed. &Un sets the floor connect
speed (see also the table in the &Un section).
&N0 Connection speed is determined by the
remote modem.
&N1 300 bps
&N2 1200 bps
&N3 2400 bps
&N4 4800 bps
&N5 7200 bps
&N6 9600 bps
&N7 12,000 bps
&N8 14,400 bps
&N9 16,800 bps
&N10 19,200 bps
&N11 21,600 bps
&N12 24,000 bps
&N13 26,400 bps
&N14 28,800 bps
&N15 31,200 bps
&N16 33,600 bps
Note: &N17 through &N39 apply only to V.90 products.
&N17 28,000 bps
T R
ECHNICAL EFERENCE
&N18 29,333 bps
&N19 30,666 bps
&N20 32,000 bps
&N21 33,333 bps
&N22 34,666 bps
&N23 36,000 bps
&N24 37,333 bps
&N25 38,666 bps
&N26 40,000 bps
&N27 41,333 bps
&N28 42,666 bps
&N29 44,000 bps
&N30 45,333 bps
&N31 46,666 bps
&N32 48,000 bps
&N33 49,333 bps
&N34 50,666 bps
&N35 52,000 bps
&N36 53,333 bps
&N37 54,666 bps
&N38 56,000 bps
&N39 57,333 bps
&Pn Sets pulse (rotary) dial make/break ratio.
&P0
&P1
U.S./Canada ratio, 39%/61%
U.K. ratio, 33%/67%
8-9