Table of Contents
Advertisement
CL3500 Series
Cylindrical Lockset
Installation Instructions
4
Cylinder Installations (cont .)
c
Standard Cylinder Installation
• Before installing cylinders, be sure lock is
unlocked and cylinder tailpiece is aligned
in same direction as cylinder bible.
To install standard cylinder (Figure 10):
• Slide cylinder all the way into lever.
• 6-pin cylinder: fold retainer at hinge
and press fit retainer halves together.
• 7-pin cylinder: break retainer at hinge
and discard spacer section. Remove
black cylinder spacer from inside of
chassis rollback for clearance.
d
Conversion Kit
To convert Schlage
CL3500 lockset (Figure 11):
• Remove threaded collar and Schlage
• Install CL3500 tailpiece with threaded collar.
Adjust collar for proper end play of plug.
For installation assistance contact Corbin Russwin
1-800-607-5703 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
cylinders with
®
tailpiece.
®
Lever
Retainer
Cylinder
Bible
Cylinder
Tailpiece
Cylinder
ACTUAL SIZE SHOWN
Actual Size Shown
7/8"
7/8"
(22 mm)
(22 mm)
6 PIN
6-pin
Figure 10
Cylinder Installation
Schlage
®
Tailpiece
Figure 11
Conversion Kit Installation
7
Fold Retainer Halves
Hinge
For 6-pin Cylinder
Remove Spacer
and Discard
Hinge
For 7-pin Cylinder
11/16"
11/16"
7 PIN
7-pin
(17 mm)
(17 mm)
Threaded
Collar
Schlage
®
Cylinder
FM237 03/19
Advertisement
Table of Contents
