Ruijie RG-S6220-H Series Installation And Initialization page 18

Building the configuration
environment
At the command prompt, you can enter a question mark (?) to list the commands available for each command mode.
Common commands are listed as follows:
Ruijie#show version /show version slots / show cpu /show memory /show interface status /show ip route /show arp /show fan
/ show power /show temperature....
Ruijie#show run //Display the current configurations.
Ruijie(config-if-GigabitEthernet
interface.
Ruijie#wr //Save the configuration file.
Ruijie#ping 8.8.8.8 //Conduct a ping test on the device.
Ruijie#traceroute 8.8.8.8 //Conduct a traceroute test on the device.
Ruijie#telnet 192.168.3.254
Ruijie#debug ip icmp //Diagnose functions of the device.
Console Management
Starting the device
1/1)#show this //New function, which is used to display the configuration of the current
//Log in to another device from the local device through Telnet.
Managing the device