Ruijie RG-S6220-H Series Installation And Initialization page 14

Building the
configuration
environment
Check the following items before you power on the switch:
① Power cables are correctly connected.
② The input voltage complies with the requirement of the switch.
③ The serial cable is connected correctly, the terminal (for example, a PC) has started,
and parameter settings are completed.
Power on the switch:
Note 1: When the switch is powered on for the first time, fans run at full speed. After the
system enters the main program,
ambient temperature and the noise will be significantly reduced.
Note 2: If a power module has been installed but is not supplying power (for example, the
power cable is not connected to a power socket, or the power socket has no power input),
the alarm indicator on the power module will be solid
Console Management
Starting the device
the fan speed will automatically decrease
Managing the device
red.
based on the