System Requirements - US Robotics USR5462 User Manual

Item
Reset Button
(LAN) Ports

System Requirements

You must have an ISP that meets the following minimum
requirements:
• Internet access from your local telephone company or Internet
Service Provider (ISP) using a DSL modem or cable modem.
• A computer equipped with a 10 Mbps, 100 Mbps, or
10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet converter.
• TCP/IP network protocol installed on each PC that needs to
access the Internet.
• A web browser, such as Microsoft Internet Explorer 5.5 or above
installed on one PC at your site for configuring the 802.11g
54Mbps Router.
Description
Use this button to reset the power and restore the default factory
settings.
Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub
or switch) on your local area network to these ports.
3