Configuring the 802.11g 54Mbps Router
Point-to-Point Tunneling Protocol (PPTP)
Point-to-Point Tunneling Protocol (PPTP) can be used to join different
physical networks using the Internet as an intermediary. Using the
above screen allows client PCs to establish a normal PPTP session
and provides hassle-free configuration of the PPTP client on each
client PC.
Enter the PPTP Account, Password, Host Name, and then Service IP
Address (usually supplied by your ISP), the assigned IP address, and
subnet mask.
Leave the Maximum Transmission Unit (MTU) at the default value
(1460) unless your service provider has specified otherwise.
Enter a maximum Idle Time Out (in minutes) to define a maximum
period of time for which the PPTP connection is maintained during
inactivity. If the connection is inactive for longer than the Maximum
24