Subscribe to Our Youtube Channel
Related Manuals for US Robotics U.S.Robotics 8000
Summary of Contents for US Robotics U.S.Robotics 8000
- Page 1 Technical Info Installation Manual for the U.S.Robotics 8000 DSL Broadbandrouter (How to set up a network with a single Internet connection for up to 4 or up to 253 Silverball devices)
- Page 2 If you also wish to link up a Silverball Max and one or more Silverball Selection Terminals, the version 6.10 or higher must be installed in both devices. If you wish to link up more than 4 Silverball devices, you have to use one or more Hubs additionally.
- Page 3 TU 4000/024/03/180102 Silverball settings: Each of the devices has to be set to „Disable DNS“ and „Use DHCP“. With these settings the IP addresses of all Silverball devices will be assigned automatically by the Router. Broadband Router Settings: The Router can be directly configured from a Silverball device.
- Page 4 TU 4000/024/04/180102 Enter the Password admin, select DHCP Server and check the following settings: If you wish to connect more then 100 Silverball devices, you have to set the IP Pool Starting Address to 1. Press „Save“ to save your changes.
- Page 5 In the next fields please enter the data of your Internet Service Provider. After that press „Save“ to save your changes. After restarting all devices (switch off and on again the Silverball devices and the router) the network is ready.
- Page 6 If you wish to operate a Silverball Max with Silverball Selection Terminals, you have to set on the Silverball Max a n IP -address which is not in the range of „IP Pool Starting Address“ and „IP Pool Ending Address“ (see picture DHCP Server) as following: TAB Austria, Industrie- und Unterhaltungselektronik Tel.: +43 (0) 7229 / 78040, Fax: +43 (0) 7229 / 78660...
- Page 7 TU 4000/024/07/180102 The same IP -address you have to set on each Silverball Selection Terminal: Your Broadband Router is now correctly configured. If you have any further queries, please feel free to use our hotline. Call +43 / 72 29 / 78 0 40 - DW 250 TAB Austria, Industrie- und Unterhaltungselektronik Tel.: +43 (0) 7229 / 78040, Fax: +43 (0) 7229 / 78660...
Need help?
Do you have a question about the U.S.Robotics 8000 and is the answer not in the manual?
Questions and answers