US Robotics USR5462 User Manual page 10

Installing the 802.11g 54Mbps Router
Turn on your cable or DSL modem. Connect the included power adapter to
the power socket on the 802.11g 54Mbps Router. Plug the power adapter
into a standard power outlet. Turn on your computer.
Step Three: Configure the basic connection settings
Note:
Perform the steps of the Setup Wizard to configure the basic connection
settings of the 802.11g 54Mbps Router.
Your Internet connection user name and password will be required for the
installation of the 802.11g 54Mbps Router. Depending on your ISP, you may
need to know some of the following information: IP Address, Subnet Mask,
Gateway/Router, DNS Servers/ Name Servers, and Service Name
(optional).
Note: To obtain the necessary information, first look within your login appli-
cation. If you cannot find all the necessary information, contact your ISP for
assistance in obtaining this information.
6
You will also need to verify that the HTTP Proxy feature of
your web browser is disabled. Refer to "Troubleshooting"
on page 57.