US Robotics USR5462 User Manual page 65

3. If authentication is being performed through a RADIUS server,
ensure that the clients are properly configured on the RADIUS
server.
4. If authentication is being performed through IEEE 802.1x, be
sure the wireless users have installed and properly configured
802.1x client software.
5.If MAC address filtering is enabled, be sure the client's address
is included in the Access Control table.
6.If wireless clients are roaming between various 802.11g
54Mbps Routers make sure all the routers and wireless
devices in the Extended Service Set (ESS) are configured to the
same SSID, and use the same authentication method.
F. If you forgot or lost the password:
Set the 802.11g 54Mbps Router to its default configuration by
pressing the reset button on the back panel for 5 seconds or more.
The default password is admin.
G. If you can not view the Web User Interface:
You will need to verify that the HTTP Proxy feature of your web
browser is disabled. This is so that your web browser will be able to
view the 802.11g 54Mbps Router configuration pages. The following
steps are for Internet Explorer.
Windows Internet Explorer 5.5 or above
To ensure proper screen refresh after a command entry, ensure that
Internet Explorer 5.5 is configured as follows: Under the menu
Tools/Internet Options/General/
Temporary Internet Files/Settings, the setting for "Check
Note:
for newer versions of stored pages" should be "Every visit
to the page."
Troubleshooting
61