US Robotics USR5462 User Manual page 24

Configuring the 802.11g 54Mbps Router
Password Settings
Use this menu to restrict access based on a password. For security
you should assign your own password before exposing the 802.11g
54Mbps Router to the Internet. (Default: admin)
Passwords can contain from 3 to 12 alphanumeric characters and are
case sensitive.
Note:
Enter a maximum Idle Time Out (in minutes) to define a maximum
period of time for which the login session is maintained during
inactivity. If the connection is inactive for longer than the maximum
idle time, it will perform system logout, and you have to log into the
web user system again.
(Default: 9 minutes)
20
If your password is lost, or you cannot gain access to the
user interface, press the Reset button on the rear panel
(holding it down for at least five seconds) to restore the
factory defaults.