Table of Contents
Advertisement
Troubleshooting:
Icon
☞
When the ALIGNMASTER button is pressed the beam will appear to
dim. This is normal. The beam is actually pulsing at a very rapid rate
to better control the recognition of the target.
☞
Alignmaster is designed to work at distances greater than 10 m (30
ft). Demonstrations or usage at shorter distances may not find the
target.
79
Basic Operation
Description
If the Alignmaster function cannot find the target, a
question mark will appear next to the target (d) to
indicate "target not found". This screen will appear for
two minutes or until another button is pressed. The
line position will then return to its original position.
If the ambient light conditions are too bright for the
Alignmaster function to operate properly, the target
will be shown with a question mark and a sun icon.
Advertisement
Table of Contents
