Leica Piper 100 User Manual page 75

Changing Line
75
To reset the grade to zero, press both, the UP and DOWN arrow but-
☞
tons (b), at the same time.
To change the line position:
1. Press the LEFT or RIGHT arrow button (a) to
move the beam to the required position.
The speed at which the line moves will
increase as the button is held.
To reset the line to the centre position, press
☞
both, the LEFT and RIGHT arrow buttons (b),
at the same time.
The current line position is indicated at the top of the display.
Icon Description
Line centred
Basic Operation
a
b