Residual Risks; Handling And Transport; Handling Of Packaging - Ferroli EGEA TECH 90 LT User, Installation, And Maintenance Manual

3.8

RESIDUAL RISKS

The design was carried out in order to ensure the essential
safety requirements for the operator in charge and for the end
user.
As far as possible, safety has been integrated into the design
and construction of the device; however, there are still risks
from which operators must be protected.
Risk Definition
RISK DUE TO ELECTRICITY.
Machine access and maintenance op-
erations expose operators to risk due to
ELECTRICAL
electricity.
HAZARD
Work on live equipment must only be
carried out by expert and qualified per-
sonnel. The following safety measures
are recommended:
• do not carry out maintenance work
without having previously discon-
nected the device from electricity;
• carry out the operations only if in
safe conditions according to that
described in this manual; in case of
doubt, contact the Manufacturer.
RISK OF GAS LEAKS.
The machine must have ducts to allow
any refrigerant gas leaks to escape into
DANGER
the external environment.
EN
144
4.

HANDLING AND TRANSPORT

ATTENTION
4.1
The device comes in a cardboard box on a wooden pallet.
The type of packaging may vary at the discretion of the man-
ufacturer.
For unloading operations, use a forklift truck or transpallet:
these should have a capacity of at least 250 kg.
cod. 3540000400 - Rev. 03 - 09/2023
EGEA TECH
During the handling and installa-
tion phases of the product, the
upper part must not undergo any
type of stress, given that it is not
supported by any structure.

HANDLING OF PACKAGING

The packaged device
must be kept upright
during all loading op-
erations.
fig. 39
90 LT - 120 LT