Ferroli EGEA TECH 90 LT User, Installation, And Maintenance Manual page 126

Value
d_1 Monday
d_2 Tuesday
d_3 Wednesday
d_4 Thursday
d_5 Friday
d_6 Saturday
d_7 Sunday
Level: U=user menu - I=installer menu
Weekly programming allows you to define 6 distinct operating
time bands for each day of the week.
Value
d1A Time slot 1
d1b Time slot 2
d1c Time slot 3
d1d Time slot 4
d1E Time slot 5
d1F Time slot 6
Level: U=user menu - I=installer menu
For each band it is possible to define the operating mode (stan-
dard or silenced), the set point, the start and end time and, in
the case of a cascade of water heaters.
For example: by accessing the "d1A" menu, by pressing the
"SET" key and scrolling with the "+" and "-" keys, the values
from "1A1" to "1A9" will appear.
Value Description default min
Enabling/Disa-
1A1 0 0
bling time band 1
1A2 Band 1 start time 00 00
1A3 Time slot 1 starts 00 00
1A4 Band 1 end time 00 00
Band 1 end
1A5 00 00
minutes
Band 1 operating
1A6 2 2
mode
1A7 Band 1 setpoint 50 38
Enabling/Disa-
1A8 bling Silent mode 0 0
in band 1
1A9 Unsable - -
Level: U=user menu - I=installer menu
By pressing the "SET"
modified, its value can be modified using the "+" and "-" keys.
Then press the "SET"
will confirm the modification) or the "ON/OFF"
the menu.
EN
126
Description
Description
Unit of
max mea- Note
sure
1 - (0=disabled, 1=enabled)
23 ora 00:23
45 min 00, 15, 30, 45
23 ora 00:23
45 min 00, 15, 30, 45
2:5= (2=ECO, 3=AUTO,
5 - 4=BOOSTER, 5=ELEC-
TRIC HEATING)
38:62 / 38:75 (depending
75 °C
on the mode selected)
1 - (0=disabled, 1=enabled)
-
- -
key again on the parameter to be
key for 3 seconds to confirm (a beep
key to exit
cod. 3540000400 - Rev. 03 - 09/2023
Carry out the same procedure for time slots 2 (d1b) to 6 (d1F), then
Level
repeat for the following days (d_2=Tuesday, d_3=Wednesday,
U / I
d_4=Thursday, d_5=Friday, d_6= Saturday, d_7=Sunday).
U / I
Once the programming has been set, it will be possible
U / I
to activate or deactivate it via parameter d_0 of the Sch.
U / I
The schedule can be more easily set via APP.
U / I
U / I
Note: between one time slot and the next, the appliance goes
U / I
into stand-by.
2.8.4 FAn MENU - FAN AND SILENT MODE SETTING
In this setting it is possible to activate the "silent mode" (for
example during the night) which allows a reduction in the noise
Level of the appliance; in this condition the performance in terms of
water heating speed may be lower.
U / I
To set the fan speed parameter, access the "Fan" menu by
U / I
pressing the "SET"
U / I
U / I
Value
U / I
Enable silent mode function
U / I F01
(0=disabled, 1=enabled)
F02 Fan speed in FAN mode
F03 Silent mode fan speed
Level: U=user menu - I=installer menu
To set the fan speed in FAN mode, select the F02 value. By
pressing the "SET"
speed will appear.
To enable the silent function, select the F01 value, pressing
the "SET"
the fan works in default conditions), to activate the silent mode
Level
press the "+" and " -" to bring the value to "1". Press the "SET"
U / I
key to confirm (a beep will confirm the modification) and
U / I
the "ON/OFF"
U / I
To set the fan speed in silent mode instead, select the F03
U / I
value. By pressing the "SET"
U / I
of the fan speed will appear. Decreasing the % value will de-
crease the noise.
U / I
U / I
U / I
-
EGEA TECH
key.
Unit of
Description default min
measure
-
%
%
key again, the default value of the fan
key again the value "0" will appear (it means that
key to exit the menu.
key again, the default value
90 LT - 120 LT
max Level
U / I
0 0 1
I
100 10 100
I
30 10 100