Example Program - Crestron PROCISE PROAMPI-7X400 Operation Manual

High-definition professional surround sound amplifier
Hide thumbs Also See for PROCISE PROAMPI-7X400:
Table of Contents

Advertisement

PROCISE™ Surround Sound Amplifier
Program Manager
18 • PROCISE™ Surround Sound Amplifier: PROAMP(I)-7X400
4. If necessary, double click a device to open the "Device Settings" window
and change the Net ID or IP ID, as shown in the following figures.
"Device Settings: Crestron PROAMP-7X400 (Cresnet)" Window
"Device Settings: Crestron PROAMP-7X400 (Ethernet)" Window
5. The ID code specified in the SIMPL Windows program must match the Net
ID or IP ID of each unit. Refer to "Identity Code" on page 10.
Program Manager is the view where programmers "program" a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).

Example Program

An example program for the PROAMP-7X400 is available from the Crestron
website (www.crestron.com/exampleprograms).
Crestron PROAMP(I)-7X400
Operations Guide – DOC. 6976A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROCISE PROAMPI-7X400 and is the answer not in the manual?

This manual is also suitable for:

Procise proamp-7x400

Table of Contents

Save PDF