Before Installation - Circontrol Genion One Installation Manual

Before installation

A
Previous recommendations
The Genion One must be installed by authorised and qualified professional.
Before handling, modifying the wiring or replacing the equipment, the power
supply must be disconnected. Handling it while it is connected is hazardous.
It is essential to keep the cables in perfect condition to avoid accidents or
damage to people and/or property.
The equipment manufacturer shall not be liable for any damages whatsoever
in the event that the user or installer does not heed the warnings and/or
recommendations indicated in this manual, nor for damages resulting from
the use of non-original products or accessories.
If an anomaly or malfunction is detected in the equipment, do not perform
any operation on it.
Check the environment you are in before initiating connection: Do not make
connections in hazardous or explosive environments.
For the equipment to be used safely, it is essential that
the people who handle it follow the safety measures
stipulated in the regulations of the country where
it is being used, wearing the necessary personal
protective equipment and heeding the various
warnings indicated in this instruction manual.
07