Circontrol Genion One Installation Manual page 22

Genion One - Installation Manual
7
A
The configuration website can be accessed in 2 ways:
Procedure 1
1. Power the equipment through terminals 1, 2 and 3.
2. The equipment will create its own WiFi connection with the name
Genion-xxxxxx, where "xxxxxx" is the last 6 digits of the MAC.
The WiFi access password will be 12345678.
3.
NOTE:
network is only for communicating with the equipment. The Internet connection
must be made via the Ethernet port.
Once connected, open Google Chrome and enter
4.
Procedure 2
1. Power the equipment through terminals 1, 2 and 3.
2. The equipment will create its own WiFi connection with the name
Genion-xxxxxx, where "xxxxxx" is the last 6 digits of the MAC.
The WiFi access password will be 12345678.
3.
NOTE:
is only for communicating with the equipment. The Internet connection must be
made via the Ethernet port.
4. Scan the QR code on the label on the side of the equipment. This code
will take you to the website:
18
Connection
The equipment does not have an Internet connection, since the WiFi
http://genion-xxxxxx.local/
The equipment does not have an Internet connection, since the WiFi network
http://genion-xxxxxx.local/