Circontrol Genion One Installation Manual page 8

Genion One - Installation Manual
1
This manual provides information about how to install, configure and use
the Genion One.
It contains all the necessary information for safe usage and help to get the
best performance from the product with step-by-step setup instructions.
THE FOLLOWING SYMBOLS ARE USED IN THIS DOCUMENT
IMPORTANT SAFETY INSTRUCTIONS
• Read all instructions before
using and setting up the
equipment.
• Do not modify the equipment.
If
CIRCONTROL will reject any
liability and the warranty will
be void.
04
TO INDICATE IMPORTANT SAFETY INFORMATION
DANGER!
Indicates that property damage may occur if
appropriate measures are not taken.
ATTENTION
Indicates that special attention should be paid to the
point indicated.
INFORMATION
i
Useful information to take into account.
you make changes,
• You must fully comply with the
electrical safety regulations
applicable in your country.
• Do not repair or tamper with
the equipment while it is
connected to a power supply