Maintenance And Cleaning - universalblue ALPES 4010W User Manual

cooker is in connection mode. Then,
press again for 5 seconds, the
previous connection code is cleared.
• When the previous code has been
cleared, the cooker hood back to
standby mode, press
the indicate light flashing from one
button to another ,the cooker hood is
in connection mode, then, press any
button on remote control to confirm the
connection.
Remote control
1. Lighting
• press button once, the light
is on, press again, the light is off.
The lighting button it is controlled
separately and will not affect any
other functions.
2. Turning on/ Increasing motor speed
key , the motor has low, mid, high
totally 3 levels.
• Press one time,the motor will
work at low speed (Turning on).
• When the hood works at low speed,
touch again,the motor changes
to mid speed.
• Base on the middle speed condition,
touch again, the motor is running
in the high speed.
• Base on the high speed condition,
touch again,the hood still works
at high speed.
3. Turning off/Decreasing motor speed
key .
• press the button and the motor
begins shift to a lower speed and the
LCD screen display the speed level.
for 5 seconds,

MAINTENANCE AND CLEANING

GENERAL
Cleaning and maintenance should be
carried out with the appliance cold
especially when cleaning. Avoid leaving
alkaline or acid substances (lemon juice,
vinegar etc.) on the surfaces.
STAINLESS STEEL
The stainless steel must be cleaned
regularly (e.g.weekly) to ensure a long life
expectancy.Dry with a clean soft cloth. A
specialized stainless steel cleaning fluid
may be used.
NOTE:
Ensure that wiping is done along with the
Repeating press the button, it keep
on decreasing the motor speed till
the cooker hood turning off.
4. Low speed, mid speed and high speed
cannot work at the same time. When
hood is on high speed, press the speed
decrease, it will turn to a lower speed;
when it is in low speed, press the
speed increase, it will turn to a higher
speed.
5. Timer
• Press the button to set up the
timer on/off function.
Caution:
• Before maintenance or cleaning is
carried out, the cooker hood should be
disconnected from the mains power
supply. Ensure that the cooker hood is
switched off at the wall socket and the
plug removed.
• External surfaces are susceptible to
scratches and abrasions, so please
follow the cleaning instructions to
ensure the best possible result is
achieved without damage.
EN
25