Gateway E-1400 System Manual page 99

Error Message
Keyboard clock line failure.
Keyboard controller failure.
Keyboard controller failure.
Keyboard not detected.
Keyboard stuck key failure.
Memory errors were
detected while the system
powered up.
Memory size error.
Non-system disk or disk
error.
Not enough memory.
Print queue is full.
Printer is out of paper.
Required parameter
missing.
88
Troubleshooting
Solutions
Try a working keyboard.
Make certain the keyboard is compatible with
the system. You may have to change the
switch setting to AT.
Try a working keyboard.
Make certain the keyboard is compatible with
the system. You may have to change the
switch setting to AT.
Try a working keyboard.
Make certain the keyboard is compatible with
the system. You may have to change the
switch setting to AT.
See "The keyboard does not work." on
page 81.
Turn off the system and check the keyboard
cable.
Remove any objects that may be resting on
the keyboard, and then restart the system.
Check for sticky keys. Clean the keyboard if
necessary.
See "Memory errors were detected during
system start up." on page 76.
Enter the BIOS Setup utility and save the
memory configuration.
Eject the diskette and press E
If the diskette is bootable, check it for errors.
Close all programs that are not currently in
use.
Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Add paper to the printer.
Make certain the printer is online.
Make certain you entered the right command.
If you are trying to exit MS-DOS to return to
exit
Windows, type and press E
.
NTER
.
NTER