Gateway E-1400 System Manual page 61

e
Press T
warns you that the BIOS is about to be changed and asks you to
confirm the BIOS version.
f
Press E
5
Once the BIOS files have been loaded, remove the diskette from drive A:
and press E
6
As the computer starts up, verify that the number of the BIOS version
reported on the screen is the number of the new BIOS you downloaded
from the Internet.
7
Restore the BIOS settings:
a
Enter BIOS Setup by pressing F1 when prompted during startup.
Once in BIOS Setup, press F9 to load the BIOS Setup utility default
settings.
Select any BIOS fields you want to change by using the ↑ (up
b
arrow) and ↓ (down arrow) keys. Press E
values you wrote down at the beginning of this process.
50
Using the BIOS Setup Utility
to select the file name and then press E
AB
. The BIOS files are loaded.
NTER
when prompted to restart the computer.
NTER
. The computer
NTER
and then reenter the
NTER