3
Locate and remove the two screws that attach the mounting bracket to
the front of the chassis.
Mounting bracket
4
Remove the CD-ROM drive from the chassis so you can access the
mounting bracket. (see "Replacing the 3.5-inch diskette or CD-ROM
drive" on page 23, for instructions on removing the CD-ROM drive.)
5
Slide bracket towards the back of the chassis until the tabs disengage from
the chassis. Lift the mounting bracket out of the chassis.
6
With the drive upside down, insert the metal points into the holes on
one side of the drive and lower the bracket over the bottom of the drive.
28
Replacing and Adding Drives
Screws