Gateway E-1400 System Manual page 40

7
Secure the drive to the bracket with a screw.
8
Replace the mounting bracket into the chassis and slide the two locking
tabs together.
9
Replace the two screws you removed in step 2.
10
Replace the CD-ROM drive.
11
Connect the proper cables to the drive (see "Replacing and adding drives"
on page 21).
12
Close the case as described in Chapter 3.
13
Reconnect the power and modem cords, and turn on the system.
Metal points
Bottom side of drive
Replacing and adding drives
Mounting
bracket
29