Gateway E-1400 System Manual page 51

5
Gently press the DIMM into the socket until the plastic socket clamps
on each side of the socket snap into the notches on the side of the DIMM.
6
Close the case, as described in Chapter 3.
7
Reconnect peripherals, the modem cord and the power cord, and turn
on the system.
To remove DIMMs:
1
Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
2
Open the case, observing the "Static electricity precautions" on page 15.
3
Using your fingers, gently push out both plastic socket clamps on each
end of the DIMM socket. The DIMM should pop up slightly from the
socket.
Caution
4
Carefully lift the DIMM out of the socket.
5
Store the DIMM in a static-free container.
40
System Components
Never try to remove a DIMM without releasing the clamps.
You may break the socket, causing serious damage.