Care, Cleaning & Maintenance; Recommended Accessories - Maxxus Multi-Trainer Pro Assembly Instructions Manual

Cleaning:
Clean the training device each time after training with a damp cloth to remove any sweat and or liquids. Do not
use solvents. Dry o the cleaned areas thoroughly.
Regular cleaning helps to keep your device in good condition and thereore also signicantly contributes to the
length of its service life. The costs of repairing a training device which has not been properly maintained will
not be covered in any way by the warranty.
Also clean the traction cables regularly.
Cleaning and Lubricating the Chrome Guide Pipes
The barbell bar guide pipes must also be cleaned and lubricated regularly to guarantee optimum smooth
running. To achieve this clean the guide pipes with a damp cloth and some liquid soap or washing up liquid.
Alternatively, you can use the MAXXUS® degreaser spray (optionally available). Ater this, dry the guide pipes
o thoroughly and lubricate them with MAXXUS® lubricant spray (optionally available) leaving a thin lm on the
surface.
With regular use you should lubricate the guide pipes once a month. If squeaking noises occur during training
the pipes require lubricating immediately. MAXXUS® degreaser and lubricating sprays are available rom our
Online Shop at www.maxxus.de or from our Showrooms in Groß-Gerau.
Maintenance
Checking the Fixing Materials
At least 1 x monthly you must check that the screws and nuts are tightened securely and tighten them if neces-
sary.
This device is recyclable. At the end of its service life you must dispose of it properly. Do not dispose the device
in the normal household rubbish.
Dispose the device at a communal waste disposal facility or at a registered waste disposal company.
Observe current regulations which apply accordingly. I in doubt seek advice rom your local government ofce
or county council as to where you can dispose of the device properly and in an environmentally sound manner.
These accessories are best suited for use with your training device. All products are
available from our online shop at www.maxxus.de or direct from our showroom.
MAXXUS® Floor Protection Mats
Due to its extreme density and material thickness of 0.5 cm and 1.2 cm, these mats
provide perect protection or oors and oor coverings against damaging, scratches
and soiling through body sweat. Noise caused by running and movement is signicantly
reduced.
Available in the following sizes:
− 160 x 90 cm – thickness 0.5 cm
− 210 x 100 cm – thickness 0.5 cm
− 100 x 100 cm - thickness 1.2 cm
MAXXUS® Degreaser Spray - Optimum cleaner or cleaning o dirt and maintaining the
guide pipes and roller surfaces.
MAXXUS® Lubricating Spray – Optimum lubrication for guide pipes.
MAXXUS® Anti-Static Spray – Eective against the static charges created in rames,
clothing and training computers. Devices which are located on carpets or synthetic oors
will become statically charged. MAXXUS ® Anti-Static Spray will deter this.
Synthetic suraces treated with MAXXUS® Anti-Static Spray do not attract dust as quick-
ly and will remain clean for longer.
MAXXUS® Special Foam Cleaner – Use or regular cleaning o your training device.
Plastic covers and metal frames can be easily cleaned and perfectly maintained with
MAXXUS ® Special Foam Cleaner. It is also suitable or cleaning pulse belts and other
training accessories.
Care, Cleaning & Maintenance
Disposal

Recommended Accessories

15
ENG